Door replacement in Melbourne

Cost Guide

How Much Does It Cost to Replace a Door in Melbourne?

Transparent pricing for door supply and installation. No hidden fees. Here’s what to expect in 2026.

Pricing Overview

What Door Replacement Costs

All prices below are supplied and installed. We quote everything as a complete job, not labour-only. Final price depends on door size, frame condition, and extras identified in your photos.

Door TypeStarting From
Standard timber replacementFrom $1,350 inc GST
StormBloc™ engineered doorFrom $2,200 inc GST
Architectural timber (NORTH / HAZE / EMBER / BONE / EVEN)From $2,742 inc GST
Entrance TransformationsFrom $5,445 inc GST
Pivot & OversizedFrom $4,500 inc GST
Fire-rated doorsetsPOA

These are real project prices, not bait numbers. Your final quote depends on door size, frame condition, and the extras identified in your photos. We cover those variables further down the page.

What’s Included

Supply and Installation

Every door replacement from Doors Replaced is a complete service. You’re not buying a door and hiring someone separately to hang it.

  • New door, specified and supplied to suit your opening
  • Trimming and fitting to the existing frame
  • Hinges (standard 3-hinge setup, upgrades available)
  • Alignment and adjustment for smooth operation
  • Weathersealing around the door and frame
  • Testing: open, close, latch, lock, deadbolt
  • Cleanup and removal of your old door
  • Hardware installation (if purchased through us)

You get a finished, working door. Not a box on your doorstep.

Variables

What Affects the Price

Door replacement isn’t one-size-fits-all. A sheltered side entry costs less than a full entrance transformation on a north-facing facade. Here’s what moves the price up or down.

Door Type

A like-for-like front door replacement sits at a different price point to an entrance transformation with sidelights and structural changes. Laundry doors, garage access doors, and rear doors are generally simpler jobs. Fire-rated doors carry a higher material cost because of the compliance requirements built into the door itself.

Door Size

Standard openings (820mm wide, 2040mm tall) keep costs lower because the door comes in a stock size or close to it. Oversized, extra-tall, or non-standard widths mean a custom-manufactured door. That adds to the price, and the lead time.

Frame Condition

If your existing frame is solid and square, we fit the new door straight into it. If the frame is rotted, warped, or out of plumb, it needs replacement before the new door goes in. Frame work is the most common reason a job costs more than the base price. We assess frame condition from the photos you send through with your quote request.

Structural Work

Widening a doorway, adding a lintel, or modifying the wall to accommodate a different door style all require structural changes. Entrance transformations and pivot door installations often involve this kind of work. It’s priced into the project quote, not added as a surprise.

Door Style and Material

Timber panel, Colorbond® (StormBloc™), glass inserts, sidelights, custom paint finishes. Each option has a different material cost. A solid timber door with no glazing will cost less than a door with decorative glass panels and sidelight frames either side.

Access and Site Conditions

Upper floors, narrow side access, heritage overlay requirements, or body corporate approvals can all affect scope. Most jobs are ground-floor front entries with straightforward access, so this doesn’t come up often. But when it does, we factor it into the quote.

Hardware

Hardware Pricing

Hardware is additional to the door replacement price unless we note otherwise in your quote.

  • Zanda Zenith lever set + deadbolt – $93.50 inc GST
  • Hinges – $13.20 inc GST each (standard 3-hinge setup = $39.60 inc GST)
  • Upgraded hardware options can be discussed during your quote.

We supply Zanda hardware as standard. It’s solid, it looks good, and the warranty is straightforward. If you have specific hardware you want to use, we can usually work with that too.

Long-Term Value

Why StormBloc™ Costs More

A StormBloc™ engineered door starts from $2,200 inc GST supplied and installed. That’s more than a standard timber replacement at $1,350 inc GST.

But here’s the maths on a standard timber door in an exposed position. Melbourne weather will force you to repaint it every 3–4 years. Budget $300–$500 per repaint. Over 15 years, that’s $900–$2,500 just in maintenance. And if the door rots out in that time, you’re buying a replacement on top of it.

StormBloc™ has Colorbond steel skins. No repainting, ever. The RotGuard™ treated pine perimeter stops rot at the bottom edge, which is where every timber door in Melbourne fails first. The door costs more on day one. After that, you spend nothing on it.

For doors that are sheltered under a deep porch or verandah, a standard timber door is fine. For anything that cops direct sun, rain, or both, StormBloc™ pays for itself within a few years and keeps saving after that.

Compare

Choose Your Option

Standard Front Door

From $1,350 inc GST supplied and installed

Final price depends on door size, frame condition, and extras identified in your photos.

Best for sheltered doors, budget-conscious replacements, and like-for-like swaps where the existing frame is in good condition.

Entrance Transformation

From $5,445 inc GST supplied and installed

Final price depends on door size, frame condition, and extras identified in your photos.

Best for street-facing upgrades, adding sidelights, widening the opening, or making the entrance a design feature. Full structural work included.

Pivot Door

POA

Best for grand entrances, architectural projects, and oversized openings. Manufactured through our specialist partners and installed on concealed pivot hardware.

All External Doors

Other Doors We Replace

This guide focuses on front door pricing, but we replace all external doors across Melbourne homes.

Every external door quote follows the same pricing structure outlined above. Send photos and measurements through our quote form and we’ll come back with a specific number for your job.

Next Step

You’ve seen the pricing.

Send us photos and measurements and we’ll quote your specific job. Most replacements can be quoted from photos alone.

Takes less than 60 seconds.